Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: power moduleDescription: SITOP The redundant module of the additional module ensures a stable 24V DC power supply by decoupling two parallel operating power supplies. This module monitors two power sources and ensures that the backup power source can immediately take over when the output voltage of the working power source drops below the (adjustable) threshold voltage. For applications exceeding 20A, each power supply requires a redundant module. The buffer module can ignore power interruptions in the millisecond range. 100 milliseconds at 40A, 800 milliseconds at 5A, and up to 3 seconds at low load current. The DIN rail is connected in parallel with the basic device and can be installed at any position in the switchgear cabinet. The signal module can be fastened to the left side of the basic equipment. This module provides floating signal contacts (with good output voltage and operational readiness) and provides signal input for remote on/off of basic equipment. ###Switch mode - Siemens (Sitop)21431+$736.751210+$710.900350+$707.6689100+$704.4376150+$699.2674250+$694.7435500+$690.21961000+$685.0494 -
![]()
Category: power moduleDescription: SITOP Modular - The three-phase SITOP PSU300B power supply is suitable for battery charging due to its constant current characteristics. For other applications, the output feature can also be switched to lock off. Three phase wide range input allows them to be used globally. The slender design only requires minimal space on the DIN rail. No installation gap is required. Three phase, 24 V DC/10 A, 20 A and 40 A wide range input 340 to 550 V AC, suitable for global use. Compact design - no additional power required for lateral clearance, with 1.5 times rated current (5 s/min) for short-term functional overload and permanent overload capacity. Adjustable output voltage of 1.2 times rated current at ambient temperatures up to 45 ° C, used to compensate for voltage drop signal contacts, can be easily integrated into factory monitoring systems. Wide operating temperature range: -10 to+70 ° C Widely certified, such as CULus, ATEX or GL # # #, CE, cULus, CB, ATEX, cCSAus Class I 2-zone, GL # # # # switch mode - Siemens (Sitop)60431+$2650.930710+$2626.831325+$2614.781650+$2602.7320100+$2590.6823150+$2578.6326250+$2566.5829500+$2554.5332 -
![]()
Category: power moduleDescription: SIMATIC PM 1507 SIMATIC PM 1507 The design and functionality of a single-phase load power supply (PM=power module) provide automatic range selection of input voltage to best match the SIMATIC S7-1500 PLC. Load power modules PM 70 W and PM 190 W 120/230 V AC feedthrough input and output circuits (load circuits) as well as sensors and actuators. Connect to all single-phase networks (120 V AC/230 V AC) through automatic range switching. Short term power buffer with 24 V DC output voltage limited to a maximum of 28 V DC (if the input voltage is too high, it can prevent damage to the 24 V load). 50% additional power supply can provide 5 seconds of short-term load per minute. For example, when switching on 24V consumables, two load current power supplies are connected in parallel to enhance performance. Rated input voltage is 120/230 V AC, 50/60 Hz. Automatic voltage range switching is 3 A (880-1365) or 8 A (880-1369). Rated output current is 70 W (880-1365) or 190 W (880-1369). Power supply fault buffer # # # approved by CE, cULus, CB, FM, ATEX. cULus Class I Div 2, IECEx, GL, ABS, BV, DNV # # # Switching Mode - Siemens (Sitop)90571+$1883.165910+$1866.046225+$1857.486450+$1848.9265100+$1840.3667150+$1831.8068250+$1823.2470500+$1814.6871 -
![]()
Category: power moduleDescription: SITOP The compact PSU100C single-phase SITOP compact is designed for power supplies in lower performance ranges. 24 V DC/0.6 A, 1.3 A, 2.5 A, and 4 A 24 V DC/3.7 A, used to provide NEC Class 2 circuits with limited output power (100 VA) single-phase, wide range input, suitable for 85 V to 264 V AC or 110 V to 300 V DC. Due to its slender design, it has a small installation surface and is efficient throughout the entire load range. Low power adjustable output voltage during no-load operation or standby, used to compensate for voltage drop (1.3 A at startup), green LED for 24 V determined plug-in connection terminal block, used for prefabricated wiring and quick electrical connection. Wide temperature range -20 to+70 ° C fully certified, such as UL, ATEX or GL # # # approved CE, cULus, cCSAus, CB, ATEX, cCSAus Class I Div 2, GL, ABS # # # switch mode - Siemens (Sitop)60881+$1230.067310+$1218.884925+$1213.293750+$1207.7024100+$1202.1112150+$1196.5200250+$1190.9288500+$1185.3376 -
![]()
Category: power moduleDescription: SITOP The modular PSU8600 SITOP PSU8600, a 3-phase power supply, sets a new standard for industrial power supplies, thanks to its full integration with Fully Integrated Automation (TIA). The advantages of this integration are not only reflected in the process of designing the TIA entrance, but also bring reliable operation. The voltage and current response thresholds for each output of the power system can be set separately, and selective monitoring of overload for each output can quickly determine the fault location. As needed, other modules of the modular system can be added without the need for high-altitude wiring, such as modules for buffering short circuit power failures. Comprehensive diagnostic and maintenance information can be provided through industrial Ethernet, which can be directly evaluated in SIMATIC S7 and visible in SIMATIC WinCC. The CNX8600 expansion module is part of the SITOP PSU8600 modular system and extends the basic devices related to selective monitoring outputs. Four integrated outputs, each with up to 5 A or 10 A and optional monitoring. Voltage and response thresholds can be set separately, and each output operation can be infinitely adjusted. The complete diagnostic information of the PSU8600 basic device can be activated and deactivated in a directional manner through the PSU8600 basic device, with PROFIenergy easy to connect and no high-altitude wiring. Small design # # # # Advantages: Multiple integrated outputs with selective monitoring reduce space requirements and costs. Individually configurable outputs (no additional power supply of 12 V or 15 V is required) can be set separately. The power loss compensation for each output is narrow, and there is no lateral installation gap. Power is saved during interruptions through directional switching of the output. # # # Design SITOP PSU8600 3-phase power supply, 24 V DC/40 A, with four outputs (maximum 10 A per output) And two Ethernet/industrial Ethernet ports (RS stock number 885-6094) SITOP CNX8600 4x 5 A (expansion module, with 48812 -
![]()
Category: power moduleDescription: SITOP 模块化、单相和双相 1 相和 2 相 SITOP 模块是技术电源，用于精密解决方案，且提供最大功能，用于复杂的工厂和机器。 24 V/5 A 和 10 A，还提供带印刷电路板的型号，具有保护涂层。 1 相和 2 相超宽输入范围 极细长设计 – 无需横向安装间隙 功率增强，具有 3 倍额定电流 (25 ms)，用于断开保护设备 超大功率，具有 1.5 倍额定电流 (5 s/min)，用于简要功能过载 恒定电流和重启之间具有可选短路响应 可选对称负载分布，用于并行操作 3 个 LED 上的工作状态 高效，达 91 % 广泛的温度范围 -25 至 +70 °C 全面认证，如 cULus、ATEX 或 GL 功率增强额定值： | ---|--- 443-0326 | 15A 443-0304 | 30A 451-7079 | 60A 714-1287 | 60A 451-7063 | 120A ### 认可 CE、cULus、ATEX、IECEx、SEMI F47、GL、ABS ### 开关模式 - Siemens (Sitop)8487 -
![]()
Category: power moduleDescription: SIMATIC PM 1507 SIMATIC PM 1507 单相负载电源（PM = 电源模块）的设计和功能提供输入电压自动范围选择，使其与 SIMATIC S7-1500 PLC 最佳匹配。负载电源模块 PM 70 W 和 PM 190 W 120/230 V 交流馈通输入和输出电路（负载电路）及传感器和执行器。 通过自动范围切换连接到所有单相网络（120 V 交流/230 V 交流） 短期电源缓冲 24 V 直流输出电压限制为最大 28 V 直流（如果输入电压过高，可防止 24 V 负载损坏） 50%额外电源每分钟可提供 5 秒短期负载，例如，在 24V 消耗品上切换时 两个负载电流电源并行连接，可增强性能 额定输入电压 120/230 V 交流，50/60 Hz 自动电压范围切换 3 A (880-1365) 或 8 A (880-1369) 额定输出电流 70 W (880-1365) 或 190 W (880-1369) 输出功率 电源故障缓冲 ### 认可 CE、cULus、CB、FM、ATEX、cULus I 类 Div 2、IECEx、GL、ABS、BV、DNV ### 开关模式 - Siemens (Sitop)2426
